Wuhan Yijue Tengda Machinery Co., Ltd
Wuhan Yijue Tengda Machinery Co., Ltd
Add to Cart
Brief introduction
Drilling buckets are mainly used for drilling water-bearing sandy soil, sludge, clay, muddy sub clay, sandy gravel, cobble, and weathered soft formation. The bucket can be designed into cylindrical type and conical type according to bucket diameter, type of drilling rig and soil conditions. The opening and closing device can be operated manually, mechanically or mixed manner. The welding angle of bucket teeth can be designed according to formation conditions.
The bottom cover is made of high-strength Mn plate, and the cutting edge includes single-layer type and double-layer type; The soil inlet also includes single-bottom type and double-bottom type.
| Diameter | 400~3000mm | Drilling bucket / barrel / auger |
| 200m~600mm | Kelly bar | |
| 12~40mm | Steel wire rope | |
| Thickness | 16~20mm | Wall |
| 40/50mm | Bottom | |
| 20/30mm | Spiral flight | |
| 30/50mm | Open body drilling bucket wall | |
| Length | 1200mm/1000mm/800mm | |
| Teeth Quantity | 4~30 for bucket/barrel | |
| 13~40 for auger |
